More info

Combo Controllers back

Product description

USB 2.0 + Firewire + 10/100/1000 Combo PCI Card
MODEL- JU-2NG011 VENDOR- SIIG, INC

FEATURES- USB 2.0 + Firewire + 10/100/100 Combo
USB 2.0 (2 ext. & 1 int.), FireWire (2 ext. & 1 int.) and
10/100/1000 (Gigabit) Ethernet combo PCI board.
Combo card design adds USB2.0 (480Mbps), 1394 (400Mbps) and Gigabit
Ethernet interface into your computer at once!
Supports various types of USB 2.0/1.1, 1394 devices including
removable drives, DV camcorders, CD-RW/DVD-ROMs, printers,
scanners, memory card reader/writers, hubs, digital cameras, PDA,
plus networking capability with Ethernet.
Works with Sony, Panasonic, Canon, Sharp, JVC and many other brands
of DV camcorders.
Includes Combo adapter, Driver CD and User s manual.
* USB 2.0 interface:
- Compliant with USB specification rev. 2.0
- Supports high-speed (480Mbps), full-speed (12Mbps) and low-speed
(1.5Mbps) data transfer modes.
- Supports simultaneous operation of multiple USB 2.0/1.1 devices.
- Hot-swapping feature allows you to connect/disconnect devices without
powering down the system.
- Works with various types of USB devices including hubs, PC video
cameras, printers, scanners, CD-R/Ws, DVD-RAMs, CF/SM/SD/MMC/Memory
Stick memory card readers, removable drives, digital cameras and
more.
* 1394a (FireWire) interface:
- Compliant with IEEE 1394-1995, 1394a-2000 and OHCI 1.1 standards.
- Supports serial bus data transfer rates of 100, 200 and 400Mb/sec.
- Hot-swapping feature allows you to connect/disconnect devices
without powering down the system.
- Works with various types of 1394 devices including DV camcorders/
cameras, hard disk drives, CD-RWs, DVD-RAMs, removable drives,
scanners and other audio/video devices.
* 10/100/100 (Gigabit) Ethernet:
- Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Supports Full Duplex Flow Control (IEEE 802.3x)
- Integrated 10/100/1000 transceiver
- Auto-Negotiation with Next page capability
- Supports pair swap/polarity/skew correction
- Crossover Detection & Auto-Correction
- Transmit/Receive FIFO (8K/64K) support
- Supports IEEE 802.1Q VLAN tagging

-- SPECIFICATIONs --------------------------------------
INTERFACE/BUS- 32-bit PCI v2.2
CHIP SET - 1394-TI, USB-NEC, 10/100/1000 Ethernet-RealTek
CONNECTORs - (2) USB 2.0 ports (external)
(1) USB 2.0 port (internal)
(2) 6-pin IEEE-1394a/FireWire ports (external)
(1) 6-pin IEEE-1394a/FireWire port (internal)
(1) 10BaseT/100BaseTX/100BaseT/RJ-45 port
O/S SUPPORT - Windows 98SE/ME/2000/XP
APPROVALS - FCC Class B (DoC) and CE
REQUIRES- Pentium II 400 MHz computer
64 MB RAM and CD-ROM drive
1GB of available hard disk space
Video card with 4MB RAM (PCI or AGP)
Windows 98SE, ME, 2000, or XP

support@siig